Pharmacokinetic analysis of plasma bicyclol by liquid chromatography–tandem mass spectrometry

Bicyclol is a synthetic drug widely used to treat chronic hepatitis B. This study aimed to develop a selective, sensitive and high‐throughput liquid chromatography–tandem mass spectrometric method for the detection of bicyclol in human plasma. Bicyclol was detected using a multiple reaction monitoring mode, with ammonium adduct ions (m/z 408.2) as the precursor ion and the [M‐CH₃]⁺ ion (m/z 373.1) subjected to demethylation as the product ion. Chromatographic separation was achieved using a Zobax Eclipse XDB‐C₁₈ column with a gradient elution and a mobile phase of 2 mm ammonium formate and acetonitrile. Bicyclol was extracted from plasma matrix by precipitation. A linear detection response was obtained for bicyclol ranging from 0.500 to 240 ng/mL, and the lower limit of quantification was 0.500 ng/mL. The intra‐ and inter‐day precisions were all ≤7.4%, and the accuracies were within ±6.0%. The extraction recovery was >95.9%, and the matrix effects were between 96.0% and 108%. Bicyclol was found to be unstable in human plasma at room temperature, but the degradation was minimized by conducting sample collection and preparation in an ice bath. The validated method was successfully applied to investigate the pharmacokinetics of bicyclol tablets in six healthy Chinese volunteers.     

Development and validation of a sensitive liquid‐chromatography tandem mass spectrometry assay for mycophenolic acid and metabolites in HepaRG cell culture: Characterization of metabolism interactions between p‐cresol and mycophenolic acid

Mycophenolic acid (MPA), a frequently used immunosuppressant, exhibits large inter‐patient pharmacokinetic variability. This study (a) developed and validated a sensitive liquid chromatography–tandem mass spectrometry (LC–MS/MS) assay for MPA and metabolites [MPA glucuronide (MPAG) and acyl‐glucuronide (AcMPAG)] in the culture medium of HepaRG cells; and (b) characterized the metabolism interaction between MPA and p‐cresol (a common uremic toxin) in this in vitro model as a potential mechanism of pharmacokinetic variability. Chromatographic separation was achieved with a C₁₈ column (4.6 × 250 mm,5 μm) using a gradient elution with water and methanol (with 0.1% formic acid and 2 mm ammonium acetate). A dual ion source ionization mode with positive multiple reaction monitoring was utilized. Multiple reaction monitoring mass transitions (m/z) were: MPA (320.95 → 207.05), MPAG (514.10 → 303.20) and AcMPAG (514.10 → 207.05). MPA‐d₃ (323.95 → 210.15) and MPAG‐d₃ (517.00 → 306.10) were utilized as internal standards. The calibration curves were linear from 0.00467 to 3.2 μg/mL for MPA/MPAG and from 0.00467 to 0.1 μg/mL for AcMPAG. The assay was validated based on industry standards. p‐Cresol inhibited MPA glucuronidation (IC₅₀ ≈ 55 μm ) and increased MPA concentration (up to >2‐fold) at physiologically relevant substrate‐inhibitor concentrations (n = 3). Our findings suggested that fluctuations in p‐cresol concentrations might be in part responsible for the large pharmacokinetic variability observed for MPA in the clinic.     

New lower bounds on the radius of spatial analyticity for the KdV equation

The radius of spatial analyticity for solutions of the KdV equation is studied. It is shown that the analyticity radius does not decay faster than $t^{?1/4}$ as time t goes to infinity. This improves the works of Selberg and da Silva (2017) [30] and Tesfahun (2017) [34]. Our strategy mainly relies on a higher order almost conservation law in Gevrey spaces, which is inspired by the I-method.     

Synthesis of Highly Functionalized N,N-Diarylamides by an Anodic C,N-Coupling Reaction

We report an innovative, sustainable and straightforward protocol for the synthesis of N,N-diarylamides equipped with nonprotected hydroxyl groups by using electrosynthesis. The concept allows the application of various substrates furnishing diarylamides with yields up to 57 % within a single and direct electrolytic protocol. The method is thereby easy to conduct in an undivided cell with constant current conditions offering a versatile and short-cut alternative to conventional pathways.     

Dose‐dependent exposure profile and metabolic characterization of notoginsenoside R1 in rat plasma by ultra‐fast liquid chromatography–electrospray ionization–tandem mass spectrometry

Notoginsenoside R₁ (NGR₁), a diagnostic protopanaxatriol‐type (ppt‐type) saponin in Panax notoginseng, possesses potent biological activities including antithrombotic, anti‐inflammatory, neuron protection and improvement of microcirculation, yet its pharmacokinetics and metabolic characterization as an individual compound remain unclear. The aim of this study was to investigate the exposure profile of NGR₁ in rats after oral and intravenous administration and to explore the metabolic characterization of NGR₁. A simple and sensitive ultra‐fast liquid chromatographic–tandem mass spectrometric method was developed and validated for the quantitative determination of NGR₁ and its major metabolites, and for characterization of its metabolic profile in rat plasma. The blood samples were precipitated with methanol, quantified in a negative multiple reaction monitoring mode and analyzed within 6.0 min. Validation parameters (linearity, precision and accuracy, recovery and matrix effect, stability) were within acceptable ranges. After oral administration, NGR₁ exhibited dose‐independent exposure behaviors with t_1/2 over 8.0 h and oral bioavailability of 0.25–0.29%. A total of seven metabolites were characterized, including two pairs of epimers, 20(R)‐notoginsenoside R₂/20(S)‐notoginsenoside R₂ and 20(R)‐ginsenoside Rh₁/20(S)‐ginsenoside Rh₁, with the 20(R) form of saponins identified for the first time in rat plasma. Five deglycometabolites were quantitatively determined, among which 20(S)‐notoginsenoside R₂, ginsenoside Rg₁, ginsenoside F₁ and protopanaxatriol displayed relatively high exploration, which may partly explain the pharmacodynamic diversity of ginsenosides after oral dose.     

Kinetics and mechanism of trichloroisocyanuric acid/NaNO2-triggered nitration of aromatic compounds under acid-free and Vilsmeier-Haack conditions

Kinetics and mechanism of nitration of aromatic compounds using trichloroisocyanuric acid (TCCA)/NaNO₂, TCCA-N,N-dimethyl formamide (TCCA-DMF)/NaNO₂, and TCCA-N,N-dimethyl acetamide (TCCA-DMA)/NaNO₂ under acid-free and Vilsmeier-Haack conditions. Reactions followed second-order kinetics with a first-order dependence on [Phenol] and [Nitrating agent] ([TCCA], [(TCCA-DMF)], or [(TCCA-DMA)] >> [NaNO₂]). Reaction rates accelerated with the introduction of electron-donating groups and retarded with electron-withdrawing groups, but did not fit well into the Hammett's theory of linear free energy relationship or its modified forms like Brown-Okamoto or Yukawa-Tsuno equations. Rate data were analyzed by Charton's multiple linear regression analysis. Isokinetic temperature (β) values, obtained from Exner's theory for different protocols, are 403.7 K (TCCA-NaNO₂), 365.8 K (TCCA-DMF)/NaNO₂, and 358 K (TCCA-DMA)/NaNO₂. These values are far above the experimental temperature range (303-323 K), indicating that the enthalpy factors are probably more important in controlling the reaction.     

Stable isotope dilution assay for the accurate determination of tricaine in fish samples by HPLC–MS–MS

Tricaine methanesulfonate is one of most commonly used anesthetics in fish during blood sampling, artificial propagation and long‐distance transportation. In this study, an accurate method for the quantitative determination of tricaine in fish samples by a stable isotope dilution assay coupled with high‐performance liquid chromatography–triple quadrupole mass spectrometry was developed. Tricaine‐D₅ was synthesized and used as an isotopically labeled internal standard for the determination of tricaine. The analytical performance of the method was validated for tricaine determination in marine fish and freshwater fish. The determination of tricaine was linear in the range of 2.0–200.0 μg L^?1. The limit of detection and limit of quantitation for fish muscle tissues were 1.0 and 4.0 μg kg^?1, respectively. Good recoveries were obtained in the range of 92.08–97.50%. The inter‐ and intra‐assay relative standard deviations (RSD values) were investigated, and the values were 0.39–3.01 and 0.85–2.77%, respectively. The values of CCα and CCβ were 10.21–10.43 and 10.42–10.87 μg kg^?1, respectively. The clearance of MS‐222 from grass carp was further studied using our method. The results demonstrate that MS‐222 could be well absorbed and rapidly eliminated after bath administration.     

FeOOH Nanocubes Anchored on Carbon Ribbons for Use in Li/O2 Batteries

A composite of FeOOH nanocubes anchored on carbon ribbons has been synthesized and used as a cathode material for Li/O₂ batteries. Fe²⁺ ion-exchanged resin serves as a precursor for both FeOOH nanocubes and carbon ribbons, which are formed simultaneously. The as-prepared FeOOH cubes are proposed to have a core–shell structure, with FeOOH as the shell and Prussian blue as the core, based on information from XPS, TEM, and EDS mapping. As a cathode material for Li/O₂ batteries, FeOOH delivers a specific capacity of 14816 mA h g⁻¹_cathode with a cycling stability of 67 cycles over 400 h. The high performance is related to the low overpotential of the oxygen reduction/evolution reaction on FeOOH. The cube structure, the supporting carbon ribbons, and the -OOH moieties all contribute to the low overpotential. The discharge product Li₂O₂ can be efficiently decomposed in the FeOOH cathode after a charging process, leading to higher cycling stability. Its high activity and stability make FeOOH a good candidate for use in non-aqueous Li/O₂ batteries.     

Freestanding Carbon Nanotube Film for Flexible Straplike Lithium/Sulfur Batteries

Flexible lithium/sulfur (Li/S) batteries are promising to meet the emerging power demand for flexible electronic devices. The key challenge for a flexible Li/S battery is to design a cathode with excellent electrochemical performance and mechanical flexibility. In this work, a flexible strap-like Li/S battery based on a S@carbon nanotube/Pt@carbon nanotube hybrid film cathode was designed. It delivers a specific capacity of 1145 mAh g⁻¹ at the first cycle and retains a specific capacity of 822 mAh g⁻¹ after 100 cycles. Moreover, the flexible Li/S battery retains stabile specific capacity and Coulombic efficiency even under severe bending conditions. As a demonstration of practical applications, an LED array is shown stably powered by the flexible Li/S battery under flattened and bent states. We also use the strap-like flexible Li/S battery as a real strap for a watch, which at the same time provides a reliable power supply to the watch.     

Experimental determination of interfacial energy for solid Al in the Al-Sn-Mg eutectic system with Bridgman-type apparatus

The equilibrated grain boundary groove shape of solid Al in equilibrium with Al-Sn-Mg eutectic liquid was observed by using a Bridgman type directional solidification apparatus. The ratio of the thermal conductivity of the equilibrated liquid to the thermal conductivity of solid Al has been obtained as 0.91. In addition, the average Gibbs-Thomson coefficient, $\bar{\mathrm{\Gamma }}=(4.20\pm 0.35)\times {10}^{-8}\mathrm{Km}$, the solid-liquid interfacial energy, ${\sigma }_{SL}=180.68\pm 23.48\text{mJ}/{\text{m}}^2$ and the grain boundary energy, ${\sigma }_{GB}=309.30\pm 29.47\text{mJ}/{\text{m}}^2$, in the Al/Al-Sn-Mg system have been calculated from the measured grain boundary shapes.